Nordson 3100V Series Customer Product Manual page 126

lnstallation
A
3-51
Adjusting
the
Circulation
ControlValve
12. Adjust
the pump air pressure regulator until the air pressure is
at
the
desired operating
setting.
Test
adhesive patterns as necessary.
13.
Air-operated guns
only.
adjust
the gun air pressure regulator until the
air pressure is
at
the desired operating
setting.
Test adhesive
patterns as necessary.
14. lf
your system has an air-operated pump or gun, record the initial air
pressure settings
in
the Becords of System
Settings at
the end
of
this
section.
15. Refer to the gun product manual for additional setup information for
the specific gun.
lf
you have an externally circulating system, adjust the circulation control
valve.
Refer
to Adjusting the Circulation Control
Valvein
tnstaltation
Procedures for Externally
circulating
systems at
the end
of this
section.
@000 Nordson Corporatlon
All rights reserved
41-3000y
lssued 5/00
A3
EN-04-[3V-X-4XXVJ-'|
3