Nordson 3100V Series Customer Product Manual page 46

Safety
A'l-7
7.
Maintenance/Repair
(contd.)
a
a
a
Follow
the specific instructions provided
in
this manual to relieve the
system
pressure
in
the entire
unit.
Secure pneumatically-
or hydraulically-operated equipment against
uncontrolled movement.
Only use parts which do not compromise the safety
of
the
unit.
Only
use
genuine Nordson pafts.
Always use tools with insulated handles when removing or installing
components.
NOTE: Always
refer to the material manufacturer's Material Safety Data
Sheet (MSDS)
or material information sheet before working with any
material.
WARNING:
Never clean any aluminum part or flush any
system using halogenated hydrocarbon
fluids.
Examples
of
common halogenated hydrocarbons are: dichloromethylene,
1,1,1-trichloroethylene, and
perchloroethylene. Halogenated
hydrocarbons
may react violently with aluminum parts.
WARNING:
Fire, open flame, and smoking are prohibited when
cleaning
fluids are
used.
Observe
allexplosion prevention
regulations. Cleaning fluids may only be heated using
temperature-controlled and explosion-protected heaters.
Never use an open flame to clean the unit or components
of
the unit.
Use only cleaning fluids designed or intended to be used with the hot
melt material being used in the
unit.
Never
use paint fluids under any
circumstances.
Note the
flash point
of
the cleaning fluid used. Only
use
a
controlled
heating method to heat fluids.
Ensure
sutficient room ventilation to draw off generated vapors.
Avoid prolonged breathing of vapors.
8.
Cleaning
a
a
a
@ 1994
Nordson Corporalion
All
rights reserved
lssued
11/94
A1
EN-02-[XX-SAFE]-1