Low Level
lndicator
E
2-s
2.
lnstallation@ontd.)
15.
Connect
the indicator wires to the porcelain connector
on
the
indicator.
16. Route the
wires behind the tank and through the recess
in
the center
frame,
then bring them
up
to the
terminal block.
17.
Connect
the indicator wire ends to the terminal block.
4130d,32
Fig.
E
2-3
Connecting
wires to
the terminal
block
1. Wires
to low level indicator
2.
Wires
to customer-supplied
remote device
18.
The low level indicator can now be connected to a remote device
provided by
the customer. Connect the wires from the remote device
to
the
terminal block directly across from the wires to the low level
indicator.
19. Replace
the electrical enclosure and the front cover. Replace the
pump
enclosure and tighten the locking screw
@897
Nordson
Corporation
All
rights reserved
41-3000v
lssued
6/97
E2EN-03-[3V-LL1]-4