Nordson 3100V Series Customer Product Manual page 103

A
3-28
lnstallation
Programming System
Controls
@ontd1
Table A
3-4
Summary of Features to Customize
ControlArea
Features
to Customize
SYSTEM SETTINGS
TEMPERATURE
CLOCK
From
SYSTEM SETTINGS you can customize the following features, which are explained
in more detail
in
Table A 3-5:
o
Password Enable
o
System-Ready
Time Delay period
.
Overtemperature Setpoint
o
Celsius or Fahrenheit display
.
GlobalTemperature Band setting
.
lndividual Temperature
Bands setting
o
Sequential or Simultaneous Startup
.
Display Heater Proportioning
o
Warning or Power notification
.
Ready
or Pump notification
.
Auto-Energize Pump (piston pump units only)
o
Auto-Energize Pump Temperature setting (piston pump units only)
o
Auto-Energize Heaters
.
'llme with
Heaters On
SETPOINT
Temperature:
This feature sets the temperature that
a
zone will maintain
during normal operation.
STANDBY
Temperature:
This feature sets the desired temperature to which
a
zone will
be reduced when the system is
in
the standby mode.
SET
TIME:
This feature keeps the current day and
time.
The clock must be on before
you
can use the HEATERS ON, HEATERS OFF, ENTER STANDBY and EXIT STANDBY
features.
ENTER STANDBY and EXIT
STANDBY
This feature sets the time that you want the
system to automatically enter and exit the standby mode.
HEATERS ON and HEATERS
OFF:
This feature sets the time that you want heaters to
automatically turn on and off.
A3EN-04-[3V-X-4XXVJ-1
3 41-3000v
lssued 5/00
@000
Nordson Corporation
All
rights reserved