Nordson 3100V Series Customer Product Manual page 47

A
1-8
Safety
9.
Thermoplastic Hot Melt
Material
10.
Equipment and Material
Disposal
NOTE: Always
refer to the material manufacturer's Material Safety Data
Sheet
(MSDS) or material information sheet before working with any hot
melt material.
a
a Ensure the work area is adequately ventilated.
Do not
exceed recommended processing
temperatures.
Doing so
creates
a danger to personnel due to decomposition of the material
Dispose of equipment and materials used in operation and cleaning
according to local regulations.
Al EN-02-[XX-SAFE]-1
lssued
11/94
O
1994 Nordson
Corporation
All
rights reserved