Nordson 3100V Series Customer Product Manual page 117

A3-42
lnstallation
To Set the Clock
(contd.)
4.
See Figure
A3-24.
Check that
the day code (1) is correct.
5.
When
you press the Enter
key,
the Selector display stops flashing
and
the hour (2) shown in the Multipurpose display begins flashing.
Check that the hour shown
in
the Multipurpose display
is
correct.
NOTE: Clock hours must
be set
to come on between 01:00 and
24:00 hours.
lf
the clock is set from 00:01 to 00:59,
it
will not operate.
Correct?
Action:
Yes Press
the Enter key (4) to save the setting.
No Press
the Up key (6) below the Selector display until
the correct code appears on the display; then press
the Enter key to save the setting.
Correct?
Action:
Yes Press
the Enter key to save the setting.
No Press
the Up or Down key below
the Multipurpose
display until the correct hour appears on the display;
then press the Enter key to save the setting.
AsEN-04-[3V-X-4XXVI-1 3
41
-3000v
lssued
5/00
@000
Nordson Corporation
All rights
reserved