Nordson 3100V Series Customer Product Manual page 6

Dai
ly
Startu
p/Sh
utdown
8.
When
the READY light turns on, press the PUMP
key.
WARNING: When the
tank lid
is
open, hot melt
vapors may be released. Vent
the application
area
or
wear
a respirator for protection from
vapors.
Automatic Startup/Shutdown
With the seven-day clock and auto-energize pump
features on, the
following occur:
1.
The heaters turn on automatically and the pump
starts when the
tank reaches either the READY
condition or a temperature
you have selected.
2.
The heaters turn off automatically and the system
shuts itself down.
ManualStartup
1.
Check
the adhesive level.
lf
the level is below
50%, add adhesive to the
tank.
Fill
to within
25 mm (1 inch)
of
the tank
toP.
2.
Close
the lid immediately to prevent contamination
of
the adhesive'
3.
lf
the POWER switch is off,
turn
it on.
4.
Prepare each gun
in
your system for operation as
follows:
.
Air-operated
guns:
turn on the operating air.
.
Handguns: unlock the trigger.
o
Electric
guns:
turn on the gun
driver.
5.
Press
the HEATERS key. The HEATERS light will
turn on and the
unit
will begin
to
heat.
,*'*'@ffis
6.
Turn on
the pump air pressure and adjust
it
to the
setting that works best for your system.
7.
Check the temperature setting
for each heated
zone.
9.
Check
the adhesive level periodically. Refill the
tank before
the level drops below 50%.
ManualShutdown
1.
Press
the
PUN/P
key. The PUMP light
willturn
off
and the pump will
stoP.
?
L'
A
A
PUMP
+
2.
Place containers beneath all guns and trigger
the
guns to
relieve hydraulic pressure.
3.
Use one of
the following methods
to prevent
accidental
gun triggering:
.
Air-operated
guns:
reduce
air pressure to
0
.
Handguns: place the trigger safety in the
locked position.
.
Electric
guns:
turn off
the gun driver.
WARNING: Never hang a handgun by
its
trigger. The gun can accidentally discharge
material, causing burns.
4.
Press
the HEATERS key. The HEATERS light will
turn off.
r,*rens6D
o
\<=/
3
lssued 4/98
o
1 E
N-O PC-[3V
-22577n-1