Nordson 3100V Series Customer Product Manual page 56

Description
A2-7
Pump
The pump transfers the melted adhesive from the tank to the dispensing
guns.
With its dual-acting design, the piston pump delivers adhesive to
the product or package surface on both the upstroke and the downstroke.
The pump has three main parts:
.
an
air motor
.
a hydraulic section
.
an actuator
Refer
to
Specitications in this section for
the pump delivery rate and other
key information about the pump.
1
3
2
at3n6so
Fig. A
2-5
Key Pafts
of
the Pump
1.
Air motor
2.
Hydraulic section
3.
Actuator
@ 1999 Nordson
Corporation
All rights reserved
41-3000y
lssued 2/99
A2
E
N-03-[3V-4-AXXVI-2