Nordson 3100V Series Customer Product Manual page 142

Operation
A 4-5
Placing the Unit ln Standby
Mode
Taking the Unit Out of Standby
Mode
To
place the unit in standby mode, press the STANDBY key. The
STANDBY light
willturn on
and
the READY light willturn
off.
The pump
will stop and the zone temperatures will drop. The heaters will maintain
heated zones
at
their standby temperature setpoints.
You
can also program the unit to automatically enter the standby mode at
a specified
time.
Refer
lo
Programming CLOCK Controlsinthe
lnstallation section.
To remove
the unit from standby mode, press the STANDBY key. The
STANDBY light
willturn
off and
the unit will heat each active zone to its
operating
temperature setpoint.
You
can also program the unit to automatically exit the standby mode at a
specified
time.
Refer
lo
Programming CLOCK Controlsinlhe lnstallation
section.
@000 Nordson Coporatlon 41-3000v
lssued
5/00
All
rights
reserved
A4EN-06-[3V-A-AAXV]-l