Assigning Light Tower Outputs - Nordson ProBlue Flex User Manual

SETUP TOOL
Please select how to load a configuration file
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
SYSTEM SETTINGS
SYSTEM IO
E 2020 Nordson Corporation

Assigning Light Tower Outputs

1. Log into your BBconn Cloud account, then do the following:
S
Select SETUP TOOL - create or load a .NOR file.
S
Select SYSTEM SETTINGS | SYSTEM IO.
2. Select Output, then select Light Tower.
3. Standard is the default output selection and has only one output that you
can define. If you have the optional Legacy I/O kit (part number
1127717), then you have an additional three outputs that you can define.
The default Light Tower output is represented by the letters LT. The
default for all Light Tower outputs are Disabled.
The Light Tower outputs include:
S
White - Power Off
S
Green - System Ready
S
Red - Any Fault Alarm or Flashing Red for any Stop Alarm
S
Amber - Any Alert Alarm
S
is Blue - Setback, Heating, Pump Off, Ready Delay
4. When done, select SAVE.
NOTES:
S
You can assign the same output selection to multiple Light Tower
outputs.
S
The System Alert and System Fault outputs are inverted by default,
although the Invert check box is clear.
ProBlue Flex OEM User's Guide
69
Part 1129255_01