Features - Nordson 3100V Series Customer Product Manual

RTD-Style Hot Melt
Hose
11
Parallel Ground Paths
for
Safe
Operation
Features
Two separate
ground paths protect personnelfrom
injury and
equipment
from damage. A dedicated low-resistance ground reduces
the possibility
of high impedance faults and ensures that protective devices operate
properly.
ln addition
to
the automatic gun and handgun hoses, Nordson offers
RTD-style water
wash
hoses
with lP-67
rated plugs and sealed cuffs at
the
gun end. High flex hoses are available for automatic guns used on
robotic/articulated applications. High flex water
wash
hoses are also
available.
CAUTION:
High
flex Nordson automatic hoses must be used
in
all robotic/articulated applications to avoid premature hose
failure.
High flex automatic hoses are constructed to withstand
the flexing that occurs in moving applications. Standard
Nordson automatic hoses are not designed for these
applications
and
are
not
warranted if used in robotic/articulated
applications.
Available accessories include brackets, in-line filters, fittings, hose
protectors, suspension support, corrugated and braided covers, plug
repair kits, and a hose/gun diagnostic device. Refer
to
Parts
and
Reference Data, Section 6,for information.
o
Rugged, quick-disconnect plugs for unit and gun end.
.
Automatic hoses feature
an
abrasion-resistant braided cover and
maximum flexibility for easier installation even in
confined spaces.
.
Handgun hoses incorporate an optional corrugated outer covering
that resists kinking to increase durability and extend service life.
o
Area sensing
RTD is accurate to within one degree of setpoint.
o
Molded high-impact cuffs increase durability.
o
High-temperature insulation reduces heat
loss.
o
HeaW
gauge wire
increases durability.
o
Parallel low-resistance ground paths for safe operation.
o
Aircraft quality fittings.
o
Stainless
steel
braided reinforcement.
.
Hightemperature
Teflon core.
I
o
@
ADo Nodson
Corporation
All
rights
ressrved
108
232E
lssued
1/00
Manual
45-21