Nordson 3100V Series Customer Product Manual page 32

Nordson Corporation
OPERATOR'S CARD
P/N 229 777C
Series
3100
Vl3400Yl3500
V|37O0V
Hot
lVlelt
lVaterial
Applicator
with
Piston Pump, Standard Filter, Standard Control
Please Note
The operator's card contains only information
necessary for daily operation
and maintenance.
For
other information, refer to the product manual.
A copy of this operator's card and an order form for
another operator's card are included
in the
introduction part
of
the operating manual.
Always
follow the instructions given
in
the
operator's card and operating manual.
Always follow instructions in the material supplier's
Material
Safety Data Sheet (MSDS) or material
information sheet.
Even at recommended operating temperatures,
hot melt material may release
vapors.
Exceeding
prescribed processing
temperatures for long
periods
of
time can result in dangerous
decomposition by-products. Remove vapors
by drawing them off with an exhaust system.
a
a
A
WARNING:
Allow only
qualified personnelto
perform the
following
tasks.
Observe and
follow the
safety instructions
in this document
and all other related documentation.
Safety Symbols
A
A
@
@
@
A
The following symbols warn against dangers or
possible sources of danger.
Become familiar with
them!
Failure
to heed
a
warning symbolcan lead to
personal injury and/or damage to the unit or other
equipment.
WARNING:
Disconnect
equipment from line
voltage.
Failure
to observe can result
in
personal injury or death.
WARNING: Hot!
Risk of
burns. Wear
heat-protective
cloth
in
g, safety goggles, and/or
heat-protective gloves depending on the
symbol or symbols
shown.
Failure
to observe
can result in personal injury or death.
WARNING:
Pressurized system or material.
Release
pressure.
Failure to obserue can
result in serious burns.
WARNING:
Failure to observe can result
in
equipment
damage, personal injury or death.
WARNING:
Risk of
electrical shock. Failure to
obserue
can result in personal injury or death.
't
lssued 4/98
2297nC