Nordson 3100V Series Customer Product Manual page 44

Safety
A 1-5
6.
Operation
@ontd.)
a ln a humid environment, only equipment featuring
a
corresponding
class
of protection may be operated.
Do not operate the unit in an explosive environment.
Keep parts of
the body or clothing away from rotating
parts. Do
not
wear loose articles
of
clothing when operating or seruicing units with
rotating
parts.
Take off wrist
watches, rings, necklaces, or similar
pieces
of
jewelry and pin up or cover long hair before performing any
work on or with the unit.
To
carry out measurements on work pieces, switch
off
the unit and
wait until
it
comes to a standstill.
Never point hand guns or applicator nozzles at yourself or other
persons.
WARNING: An operator
or seruice technician working with
the
unit should be aware of less-obvious dangers that often cannot
be
completely minimized at production sites:
Exposed surfaces
of
the unit which cannot be practically
safeguarded. They may be hot and take time to cool after the unit
has been operating.
The possibility that electrical potentials may remain
in
the unit after
the unit was de-energized
Hot melt material and vapors
a
Hydraulically
or pneumatically operated parts
of
the unit
a
Parts
winding something up or down which are not covered
lf
the unit malfunctions, switch it off immediately.
.
Turn the circuit breaker or main power switch
OFF.
.
Have
the unit repaired by qualified personnel
only.
a
a
Less-Obvious Dangers
Action in
the Event
of Unit
Malfunction
a
a
a
a
@
1994 Nordson Corporation
All
rights reserved
lssued
11/94
A1
EN-02-[XX-SAFE]-1