Teledyne T200H User Manual page 95

Teledyne API - Model T200H/T200M Operation Manual
4.7.2.12. HOLDOFF Feature
Toggle button to turn
HOLDOFF ON or OFF
07270D DCN7141
The DAS HOLDOFF feature allows to prevent data collection during calibrations and
during the DAS_HOLDOFF period enabled and specified in the VARS (Section 4.12).
To enable or disable the HOLDOFF for any one DAS channel, follow the instruction
shown in Section 4.7.2.2 then press:
From the DATA ACQUISITION menu
(see Section 6.7.2.2)
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> key until...
SETUP X.X CAL HOLD OFF:ON
SET> EDIT
SETUP X.X CAL HOLD OFF:ON
ON
ATIMER, 2, 900
DEL EDIT PRNT EXIT
PRINT EXIT
PRINT EXIT
ENTR EXIT
Operating Instructions
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
93