Table of Contents
Advertisement
Introduction, Features, and Options
1.4. OPTIONS
Option
Option
Number
Pumps
11A
11B
12A
12B
12C
Rack Mount
Kits
20A
20B
21
23
Carrying Strap/Handle
29
TO AVOID PERSONAL INJURY WE RECOMMEND THAT TWO PERSONS LIFT AND CARRY THE
ANALYZER. DISCONNECT ALL CABLES AND TUBING FROM THE ANALYZER BEFORE MOVING IT.
Analog Input and USB port
64B
Current Loop Analog
Outputs
41
Parts Kits
42A
Calibration Valves
50A
50D
20
Description/Notes
Pumps meet all typical AC power supply standards while exhibiting same
pneumatic performance.
Ship without pump
Pumpless Pump Pack
Internal Pump 115V @ 60 Hz
Internal Pump 220V @ 60 Hz
Internal Pump 220V @ 50 Hz
Options for mounting the analyzer in standard 19" racks
Rack mount brackets with 26 in. (660 mm) chassis slides
Rack mount brackets with 24 in. (610 mm) chassis slides
Rack mount brackets only (compatible with carrying strap, Option 29)
Rack mount for external pump pack (no slides)
Side-mounted strap for hand-carrying analyzer
Extends from "flat" position to accommodate hand for carrying.
Recesses to 9mm (3/8") dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
CAUTION – GENERAL SAFETY HAZARD
THE T200H OR T200M ANALYZER WEIGHS ABOUT 18 KG (40 POUNDS).
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
Also can be used for logging these signals in the analyzer's internal
DAS
Adds isolated, voltage-to-current conversion circuitry to the analyzer's analog
outputs.
Can be configured for any output range between 0 and 20 mA.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
Spare parts and expendables
Expendables Kit includes a recommended set of expendables for
one year of operation of this instrument including replacement
sample particulate filters.
Used to control the flow of calibration gases generated from external sources,
rather than manually switching the rear panel pneumatic connections.
AMBIENT ZERO AND AMBIENT SPAN VALVES
Zero Air and Span Gas input supplied at ambient pressure.
Gases controlled by 2 internal valves; SAMPLE/CAL & ZERO/SPAN.
ZERO SCRUBBER AND DUAL PRESSURIZED SPAN VALVES
Zero Air Scrubber produces/supplies zero air to the ZERO inlet port.
Dual Pressurized Span Valves for two gas mixtures to separate inlet ports,
HIGH SPAN and LOW SPAN
Teledyne API - Model T200H/T200M Operation Manual
.
Reference
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Section 3.4.2
Section 3.4.5
Appendix B
Section 3.5.3.1
Section 3.5.3.2
07270D DCN7141
Advertisement
Table of Contents
