Table of Contents
Advertisement
APPENDIX A-3: Warnings and Test Measurements
1
Name
WHVPS
WDYNZERO
WDYNSPAN
WREARBOARD
WRELAYBOARD
WFRONTPANEL
WANALOGCAL
1
The name is used to request a message via the RS-232 interface, as in "T BOXTEMP".
2
Engineering firmware only.
3
Current instrument units.
4
Factory option.
5
O
option.
2
6
User-configurable D/A output option.
7
Optional.
8
CO
option.
2
9
Concentration alarm option.
10
M200EUP.
11
T200U, T200U_NOy, M200EU and M200EU_NO
12
T-Series External analog input option.
A-10
Message Text
Warnings
HVPS WARNING
CANNOT DYN ZERO
CANNOT DYN SPAN
REAR BOARD NOT DET
RELAY BOARD WARN
FRONT PANEL WARN
ANALOG CAL WARNING
.
y
T200H/M and 200EH/EM Menu Trees (05147J DCN7141)
reading at time warning was displayed.
High voltage power supply output outside
of warning limits.
Contact closure zero calibration failed
while DYN_ZERO was set to ON.
Contact closure span calibration failed
while DYN_SPAN was set to ON.
Rear board was not detected during
power up.
Firmware is unable to communicate with
the relay board.
Firmware is unable to communicate with
the front panel.
The A/D or at least one D/A channel has
not been calibrated.
Description
07270D DCN7141
Advertisement
Table of Contents
