Table 8-4: Thermocouple Configuration Jumper (Jp5) Pin-Outs - Teledyne T200H User Manual

Principles of Operation

Table 8-4: Thermocouple Configuration Jumper (JP5) Pin-Outs

TC INPUT JUMPER PAIR
1 – 11
2 – 12
TC1
3 – 13
4 – 14
5 – 15
6
7 – 17
TC2
8 – 18
9 – 19
10 – 20
Figure 8-21:
296
DESCRIPTION
Gain Selector
Output Scale Selector
Type J Compensation
Type K Compensation
Termination Selector
6
– 1
Gain Selector
Output Scale Selector
Type J Compensation
Type K Compensation
Termination Selector
Thermocouple Configuration Jumper (JP5) Pin-Outs
Teledyne API - Model T200H/T200M Operation Manual
Selects preamp gain factor for J or K TC
- IN = J TC gain factor
- OUT = K TC gain factor
Selects preamp gain factor for J or K TC
- IN = 5 mV / °C
- OUT = 10 mV / °C
When present, sets Cold Junction
Compensation for J type Thermocouple
When present, sets Cold Junction
Compensation for K type Thermocouple
between Isolated and grounded TC
Selects
Isolate TC
- IN =
Grounded TC
- OUT =
Same as Pins 1 – 11 above.
Same as Pins 2 – 12 above.
Same as Pins 3 – 13 above.
Same as Pins 4 – 14 above.
Same as Pins 5 – 15 above.
FUNCTION
07270D DCN7141