Teledyne T200H User Manual page 85

Teledyne API - Model T200H/T200M Operation Manual
4.7.2.1. Viewing DAS Data and Settings
EXIT will return to the
main SAMPLE Display.
Default
setting for
HIRES is
DISABLED.
07270D DCN7141
DAS data and settings can be viewed on the front panel through the following keystroke
sequence.
SAMPLE A1:NXCNC1=100PPM
< TST TST > CAL
PRIMARY SETUP MENU
SETUP X.X
CFG DAS RNGE PASS CLK MORE
SETUP X.X DATA ACQUISITION
VIEW EDIT
SETUP X.X CONC : DATA AVAILABLE
NEXT VIEW
SETUP X.X CALDAT: DATA AVAILABLE
PREV NEXT VIEW
SETUP X.X CALCHE: DATA AVAILABLE
PREV NEXT VIEW
SETUP X.X DIAG: DATA AVAILABLE
PREV NEXT VIEW
SETUP X.X HIRES: NO DATA AVAILABLE
PREV
FRONT PANEL CONTROL BUTTON FUNCTIONS
BUTTON
NOX=XXX.X
SETUP
EXIT
EXIT
Buttons only appear if applicable
EXIT
SETUP X.X 287:10:00 NXCNC1: XXX.X PPM
PV10 PREV NEXT NX10 <PRM
EXIT
SETUP X.X 281:15:10 NXZCS1: X.XXX
PV10 PREV NEXT NX10 <PRM
EXIT
SETUP X.X 285:00:00 SMPFLW= X.XXX
PV10 PREV <PRM
EXIT
SETUP X.X 00:00::00 PMTDET=0000.0000 m
PV10 PREV <PRM
EXIT
Operating Instructions
FUNCTION
<PRM Moves to the next Parameter
PRM> Moves to the previous
Parameter
NX10 Moves the view forward 10
data points/channels
NEXT Moves to the next data
point/channel
PREV Moves to the previous data
point/channel
PV10 Moves the view back 10 data
points/channels
PRM> EXIT
PPM
PRM> EXIT
cc/m
PRM> EXIT
PRM> EXIT
83