Teledyne T200H User Manual page 88

Operating Instructions
4.7.2.4. Editing DAS Parameters
YES will delete
all data in that
entire channel.
Moves the
display between
available
Parameters
Inserts a new Parameter
before the currently
displayed Parameter
86
Data channels can be edited individually from the front panel without affecting other
data channels. However, when editing a data channel, such as during adding, deleting or
editing parameters, all data for that particular channel will be lost, because the DAS can
store only data of one format (number of parameter columns etc.) for any given channel.
In addition, an DAS configuration can only be uploaded remotely as an entire set of
channels. Hence, remote update of the DAS will always delete all current channels and
stored data.
To modify, add or delete a parameter, follow the instruction shown in Section 4.7.2.2
then press:
From the DATA ACQUISITION menu
(see Section 6.7.2.2)
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT
SETUP X.X
<SET SET> EDIT
Press SET> key until...
SETUP X.X PARAMETERS:
<SET SET> EDIT
SETUP X.X EDIT PARAMS (DELETE DATA)
YES NO
SETUP X.X 0) PARAM=DETREP, MODE=INST
PREV NEXT
Deletes the Parameter
Teledyne API - Model T200H/T200M Operation Manual
ATIMER, 8,
INS DEL EDIT PRNT
NAME:CONC
PRINT
8
PRINT
Edit Data Parameter Menu
INS DEL EDIT
currently displayed.
Exits to the main
Data Acquisition
800
menu
EXIT
EXIT
EXIT
NO returns to
the previous
menu and
retains all data.
Exits to the main
Data Acquisition
EXIT
menu
Use to configure
the functions for
this Parameter.
07270D DCN7141