Teledyne T200H User Manual page 94

Operating Instructions
4.7.2.11. Disabling/Enabling Data Channels
Toggle button to turn
channel ON or OFF
92
Data channels can be temporarily disabled, which can reduce the read/write wear on the
disk-on-module. The HIRES channel of the T200H/M, for example, is disabled by
default.
To disable a data channel, follow the instruction shown in Section 4.7.2.2 then press:
From the DATA ACQUISITION menu
(see DAS section)
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS
SETUP X.X
<SET SET> EDIT
Press SET> key until...
SETUP X.X CHANNEL ENABLE:ON
<SET SET> EDIT
SETUP X.X CHANNEL ENABLE:ON
OFF
Teledyne API - Model T200H/T200M Operation Manual
ATIMER, 8, 800
DEL EDIT PRNT EXIT
NAME:CONC
PRINT EXIT
PRINT EXIT
ENTR EXIT
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
07270D DCN7141