Teledyne T200H User Manual page 89

Teledyne API - Model T200H/T200M Operation Manual
FROM THE EDIT DATA PARAMETER MENU
(see previous section)
SETUP X.X 0) PARAM=NXCNC1, MODE=AVG
PREV NEXT INS
SETUP X.X PARAMETERS: NOCNC1
SET> EDIT
SETUP X.X SAMPLE MODE: INST
<SET SET> EDIT
SETUP X.X PRECISION:4
<SET SET> EDIT
SETUP X.X STORE NUM. SAMPLES: OFF
<SET EDIT
<SET Returns to
previous
Functions
07270D DCN7141
To configure the parameters for a specific data parameter, press:
DEL EDIT EXIT
EXIT
SETUP X.X PARAMETER: NXCNC1
PREV NEXT
Cycle through list of available
EXIT
SETUP X.X SAMPLE MODE: INST
INST AVG MIN MAX
EXIT
SETUP X.X PRECISION: 4
1
EXIT
SETUP X.X STORE NUM. SAMPLES: OFF
OFF
See Appendix A-5 for list of DAS parameters available on the T200H/M.
ENTR EXIT
Parameters.
EXIT
Press the key for the desired mode
EXIT
Set for 0-4
ENTR EXIT
Turn ON or OFF
Operating Instructions
ENTR accepts the
new setting and
returns to the previous
menu.
EXIT ignores the new
setting and returns to
the previous menu.
87