Teledyne API - Model T200H/T200M Operation Manual
2
8.5.12. I
C DATA BUS
8.5.13. POWER-UP CIRCUIT
07270D DCN7141
2
I
C is a two-wire, clocked, bi-directional, digital serial I/O bus that is used widely in
commercial and consumer electronic systems. A transceiver on the motherboard converts
data and control signals from the PC-104 bus to I
board and optional analog input circuitry.
This circuit monitors the +5V power supply during analyzer start-up and sets the analog
outputs, external digital I/O ports, and I
and the instrument software can establish control.
2
C. The data are then fed to the relay
2
C circuitry to specific values until the CPU boots
Principles of Operation
301