Teledyne T200H User Manual page 115

Teledyne API - Model T200H/T200M Operation Manual
SETUP X.X
ID
SAMPLE
8
DHCP: ON is
SETUP X.X
default setting.
Skip this step
if it has been
SET>
set to OFF.
SETUP X.X
SETUP X.X
<SET SET> EDIT
SETUP X.X
<SET
SETUP X.X
<SET
SETUP X.X
<SET
Pressing EXIT from
any of the above
display menus
causes the Ethernet
option to reinitialize
SETUP X.X
its internal interface
firmware
SETUP X.X
07270D DCN7141
COMMUNICATIONS MENU
INET COM1
ENTER SETUP PASS : 818
1 8 ENTR
DHCP: ON
EDIT
DHCP: OFF
SET> EDIT
INST IP: 000.000.000.000
GATEWAY IP: 000.000.000.000
SET> EDIT
SUBNET MASK:255.255.255.0
SET> EDIT
TCP PORT 3000
EDIT
INITIALIZING INET
...
INITIALIZING INET 100%
INITIALIZATI0N SUCCEEDED
SETUP X.X
ID INET
Figure 4-7:
Internet Configuration Button Functions
BUTTON
EXIT
Location of cursor. Press to cycle through the range of
[0]
numerals and available characters ("0 – 9" & " . ")
<CH CH> Moves the cursor one character left or right.
DEL
Deletes a character at the cursor location.
Accepts the new setting and returns to the previous
EXIT
ENTR
menu.
Ignores the new setting and returns to the previous
EXIT
menu.
Some buttons appear only when relevant.
EXIT
EXIT
EXIT
SETUP X.X INST IP: [0] 00.000.000
<CH CH> DEL [0]
EXIT
SETUP X.X GATEWAY IP: [0] 00.000.000
<CH CH> DEL [?]
EXIT
SETUP X.X SUBNET MASK:[2]55.255.255.0
<CH CH> DEL [?]
EXIT
The PORT number must remain at 3000.
Do not change this setting unless instructed to by
Teledyne Instruments Customer Service personnel.
0%
SETUP X.X INITIALIZATION FAILED
COMMUNICATIONS MENU
COM1 EXIT
COM – LAN / Internet Manual Configuration
Operating Instructions
FUNCTION
Cursor
location is
indicated by
brackets
ENTR EXIT
ENTR
accepts
the new
ENTR EXIT assigned
numbers;
EXIT
ignores
ENTR EXIT
Contact your IT
Network Administrator
113