Basic - Vacon 100 flow Applications Manual

MONITORING MENU
4 To move the line to see the values of some other
location, use the arrow buttons Left and Right.
Table 15: The trend curve parameters
Index Parameter
M2.2.1 View Trend curve
P2.2.2 Sampling interval
P2.2.3 Channel 1 min
P2.2.4 Channel 1 max
P2.2.5 Channel 2 min
P2.2.6 Channel 2 max
P2.2.7 Autoscale
4.1.3

BASIC

You can see the basic monitoring values and their related data in the next table.
NOTE!
Only the standard I/O board statuses are available in the Monitor menu. You can
find the statuses of all the I/O board signals as raw data in the I/O and Hardware
menu.
Do a check of the statuses of the expander I/O board in the I/O and Hardware menu when the
system asks you to do it.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Min Max Unit
100 432000 ms
-214748 1000
-1000 214748
-214748 1000
-1000 214748
0 1
READY ALARM
RUN
Motor Current
Motor Speed
Default ID Description
Go into this menu to
monitor values in a
curve form.
100 2368
-1000 2369
1000 2370
-1000 2371
1000 2372
0 = Disabled
0 2373
1 = Enabled
VACON · 117
I/O
0.01A
-254rpm
4