Editing The Values - Vacon 100 flow Applications Manual

VACON · 104
D. The current location in the menu
E. The indicators of the control place
3.3.1

EDITING THE VALUES

CHANGING THE TEXT VALUE OF A PARAMETER
Set the value of a parameter with this procedure.
1 Find the parameter with the arrow buttons.
2 To go to the Edit mode, push the OK button.
3 To set a new value, push the arrow buttons Up and
Down.
4 Accept the change with the OK button. To ignore
the change, go back to the level where you were
before with the Back/Reset button.
EDITING THE NUMERICAL VALUES
1 Find the parameter with the arrow buttons.
2 Go to the Edit mode.
3
F. The indicators of the rotation direction
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
USER INTERFACES