Maintenance Counters; Fieldbus Data - Vacon 100 flow Applications Manual

MONITORING VALUE DESCRIPTIONS
V2.10.11 PUMP 5 RUNNING TIME (ID 1624)
This monitoring value shows the operating hours of the pump in Multi-pump system.
V2.10.12 PUMP 6 RUNNING TIME (ID 1625)
This monitoring value shows the operating hours of the pump in Multi-pump system.
V2.10.13 PUMP 7 RUNNING TIME (ID 1626)
This monitoring value shows the operating hours of the pump in Multi-pump system.
V2.10.14 PUMP 8 RUNNING TIME (ID 1627)
This monitoring value shows the operating hours of the pump in Multi-pump system.
9.9

MAINTENANCE COUNTERS

V2.11.1 MAINTENANCE COUNTER 1 (ID 1101)
This monitoring value shows the status of the maintenance counter.
The status of the maintenance counter is shown as revolutions multiplied by 1000, or in
hours. For the configuration and activation of this counter, see 10.17 Maintenance counters.
9.10

FIELDBUS DATA

V2.12.1 FB CONTROL WORD (ID 874)
This monitoring value shows the status of the fieldbus control word that the application uses
in bypass mode.
Depending on the fieldbus type or profile, the data that is received from the fieldbus can be
modified before it is sent to the application.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
VACON · 211
9