Vacon 100 flow Applications Manual page 18

VACON · 18
Table 3: M1 Quick Setup
Index Parameter
1.2 Application
Minimum Frequency
1.3
Reference
Maximum Frequency
1.4
Reference
1.5 Acceleration Time 1
1.6 Deceleration Time 1
1.7 Motor Current Limit
1.8 Motor Type
Motor Nominal Volt-
1.9
age
1
Min Max Unit
0 4
0.00 P1.4 Hz
P1.3 320.0 Hz
0.1 3000.0
0.1 3000.0
I *0.1 I
H S
0 2
Varies Varies
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Default ID
0 212
The minimum fre-
0.0 101 quency reference that
is accepted.
The maximum fre-
50.0 /
102 quency reference that
60.0
is accepted.
Gives the quantity of
time that is necessary
for the output fre-
s 5.0 103
quency to increase
from 0 frequency to the
maximum frequency.
Gives the quantity of
time that is necessary
for the output fre-
s 5.0 104 quency to decrease
from the maximum
frequency to 0 fre-
quency.
The maximum motor
A Varies 107 current from the AC
drive.
0 650
Find this value U
the nameplate of the
motor.
V Varies 110 NOTE!
Find out if the motor
connection is Delta or
Star.
QUICK STARTUP GUIDE
Description
0 = Standard
1 = HVAC
2 = PID Control
3 = Multi-pump (single
drive)
4 = Multi-pump (multi-
drive)
0 = Induction Motor
1 = Permanent Magnet
Motor
2 = Reluctance Motor
on
n