Vacon 100 flow Applications Manual page 148

VACON · 148
Table 51: Standard I/O board analogue output settings, Slot A
Index Parameter
P3.5.4.1.1 AO1 function
P3.5.4.1.2 AO1 filter time
P3.5.4.1.3 AO1 minimum
P3.5.4.1.4 AO1 minimum scale
P3.5.4.1.5 AO1 maximum scale
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in 12.1 The default values of parameters in the different applications.
THE ANALOGUE OUTPUTS OF THE EXPANDER SLOTS C, D AND E
Shows only the parameters for the outputs on option boards in slots C, D and E. Make the
selections as in AO1 Function (P3.5.4.1.1).
This group or these parameters do not show, if there are no digital outputs in slots C, D or E.
5
Min Max Unit
0 31
0.0 300.0
0 1
-214748. 214748.
Varies
36 36
-214748. 214748.
Varies
36Varies 36
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Default ID
17 = ProcessDataIn4
(0-100%)
18 = ProcessDataIn5
(0-100%)
19 = ProcessDataIn6
(0-100%)
20 = ProcessDataIn7
(0-100%)
21 = ProcessDataIn8
(0-100%)
22 = Block Out.1
(0-100%)
23 = Block Out.2
(0-100%)
24 = Block Out.3
2 * 10050
(0-100%)
25 = Block Out.4
(0-100%)
26 = Block Out.5
(0-100%)
27 = Block Out.6
(0-100%)
28 = Block Out.7
(0-100%)
29 = Block Out.8
(0-100%)
30 = Block Out.9
(0-100%)
31 = Block Out.10
(0-100%)
s 1.0 * 10051 0 = No filtering
0 = 0 mA / 0V
0 * 10052
1 = 4 mA / 2V
0.0 * 10053
0.0 * 10054
PARAMETERS MENU
Description