Changing The Access Code Of The User Levels - Vacon 100 flow Applications Manual

USER SETTINGS, FAVOURITES AND USER LEVEL MENUS
Table 115: The user level parameters
Index Parameter
P8.1 User Level
P8.2 Access Code
CAUTION!
Do not lose the access code. If the access code is lost, contact your nearest service
center or partner.

CHANGING THE ACCESS CODE OF THE USER LEVELS

1 Go to the User levels.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Min Max Unit
1 3
0 99999
Default ID Description
1 = Normal. All the
menus are visible in
the main menu.
2 = Monitoring. Only
the monitoring and
user level menus are
visible in the main
menu.
1 1194
3 = Favourites. Only
the favourites and user
level menus are visible
in the main menu.
4 = Monitoring &
Favourites. Monitoring,
favourites and user
level menus are visible
in the main menu.
If you set the value to
be to other than 0
before you go to Moni-
toring from, for exam-
ple, Normal, you have
to give the access code
0 2362 when you go back to
Normal. This prevents
personnel who are not
approved from making
changes in the param-
eters on the control
panel.
VACON · 201
8