Vacon 100 flow Applications Manual page 132

VACON · 132
Table 33: Start/stop setup menu
Index Parameter
P3.2.8 Fieldbus Start Logic
P3.2.9 Start Delay
Remote to Local
P3.2.10
Function
P3.2.11 Restart Delay
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in Chapter 12.1 The default values of parameters in the different
applications.
5
Min Max Unit
0 1
0.000 60.000
0 2
0.0 20.0 min
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Default ID
0 = A rising edge is
0 889 necessary
1 = State
s 0.000 524
0 = Keep Run
1 = Keep Run & Refer-
2 181
ence
2 = Stop
0.0 15555 0 = Not used
PARAMETERS MENU
Description