Fire Mode Wizard - Vacon 100 flow Applications Manual

VACON · 88
34 Set a value for P3.15.9 Autochange Days
35 Set a value for P3.15.10 Autochange Time of Day
36 Set a value for P3.15.13 Bandwidth
Set a value for P3.15.14 Bandwidth Delay
37
The Multi-pump (multidrive) application wizard is completed.
2.6

FIRE MODE WIZARD

To start the Fire mode wizard, make the selection Activate for parameter 1.1.2 in the Quick
setup menu.
CAUTION!
Before you continue, read about the password and warranty in Chapter 10.18 Fire
mode.
Set a value for parameter P3.17.2 Fire Mode Fre-
1
quency Source
If you set a value other than Fire mode frequency, the wizard goes directly to step 3.
Set a value for parameter P3.17.3 Fire Mode Fre-
2
quency
Activate the signal when the contact opens or when
it closes
3
If you set the value Open contact in step 3, the wizard goes directly to step 5. If you set the
value Closed contact in step 3, step 5 is unnecessary.
2
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Range: Monday to Sunday
Range: 00:00:00 to 23:59:59
Range: 0-100%
Range: 0-3600 s
More than 1 selection
Range: varies
0 = Open contact
1 = Closed contact
WIZARDS