Vacon 100 flow Applications Manual page 165

PARAMETERS MENU
Table 75: Setpoint settings
Index Parameter
P3.13.2.7 Setpoint 1 Minimum
P3.13.2.8 Setpoint 1 Maximum
P3.13.2.9 Setpoint 1 Boost
Setpoint Source 2
P3.13.2.10
Selection
P3.13.2.11 Setpoint 2 Minimum
P3.13.2.12 Setpoint 2 Maximum
P3.13.2.13 Setpoint 2 Boost
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in 12.1 The default values of parameters in the different applications.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Min Max Unit
-200.00 200.00 %
-200.00 200.00 %
-2.0 2.0 x
0 Varies
-200.00 200.00 %
-200.00 200.00 %
-2.0 2.0 x
Default ID Description
0.00 1069
100.00 1070
1.0 1071
See P3.13.2.6.
2 * 431
0.00 1073 See P3.13.2.7.
100.00 1074 See P3.13.2.8.
1.0 1078 See P3.13.2.9.
VACON · 165
5