Vacon 100 flow Applications Manual page 243

PARAMETER DESCRIPTIONS
Necessary step
Make a selection of the value 0 for parameter P3.3.1.5.
Table 118: The selection of preset frequencies when P3.3.3.1 = Binary coded
Activated digital input signal
Preset Freq Sel2
(P3.3.3.12)
*
*
*
*
* = the input is activated.
VALUE 1 SELECTED FOR PARAMETER P3.3.3.1:
You can use the Preset Frequencies 1 to 3 with different sets of active digital inputs. The
number of active inputs tells which one is used.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Preset Freq Sel1
(P3.3.3.11)
*
*
*
*
Activated frequency
Preset frequency 0
Preset Freq Sel0
(P3.3.3.10)
*
*
*
*
VACON · 243
Activated frequency
reference
Preset frequency 0
Only if Preset Freq 0 is set
as frequency reference
source with P3.3.3.1.5,
P3.3.1.6, P3.3.1.7 or
P3.3.1.10.
Preset frequency 1
Preset frequency 2
Preset frequency 3
Preset frequency 4
Preset frequency 5
Preset frequency 6
Preset frequency 7
10