Hpe Smart Storage Administrator; Hpe Mr Storage Administrator - HPE ProLiant DL388 Gen10 User Manual

HPE Smart Storage Administrator

HPE SSA is the main tool for configuring arrays on HPE Smart Array SR controllers. It exists in three interface
formats: the HPE SSA GUI, the HPE SSA CLI, and HPE SSA Scripting. All formats provide support for
configuration tasks. Some of the advanced tasks are available in only one format.
The diagnostic features in HPE SSA are also available in the standalone software HPE Smart Storage
Administrator Diagnostics Utility CLI.
During the initial provisioning of the server or compute module, an array is required to be configured before
the operating system can be installed. You can configure the array using SSA.
HPE SSA is accessible both offline (either through HPE Intelligent Provisioning or as a standalone bootable
ISO image) and online:
• Accessing HPE SSA in the offline environment
IMPORTANT: If you are updating an existing server in an offline environment, obtain the latest
version of HPE SSA through Service Pack for ProLiant before performing configuration procedures.
Using one of multiple methods, you can run HPE SSA before launching the host operating system. In
offline mode, users can configure or maintain detected and supported devices, such as optional Smart
Array controllers and integrated Smart Array controllers. Some HPE SSA features are only available in the
offline environment, such as setting the boot controller and boot volume.
• Accessing HPE SSA in the online environment
This method requires an administrator to download the HPE SSA executables and install them. You can
run HPE SSA online after launching the host operating system.
For more information, see HPE Smart Array SR Gen10 Configuration Guide at the Hewlett Packard
Enterprise website.

HPE MR Storage Administrator

HPE MR Storage Administrator is a web-based application that enables you to monitor, maintain,
troubleshoot, and configure the HPE Smart Array MR controller. MR Storage Administrator helps you to view,
create, and manage storage configurations.
• Monitoring and Configuring: MR Storage Administrator enables you to monitor the controllers and
configure the drives on the controller. It displays the status of the controller cards, logical drives, and drives
on the controller. The device status icons notify you if there are drive failures and other events that require
your immediate attention. Email notifications about the status of the server are sent based on your alert
settings. The system errors and events are recorded and displayed in an event log file. You can also
import or clear foreign configurations.
• Maintaining: Using MR Storage Administrator, you can perform system maintenance tasks, such as
updating the controller firmware.
• Troubleshooting: MR Storage Administrator displays information related to drive failures, device failures,
and other issues. It also provides recommendations and displays contextual links, helping you to locate
the drives/devices that have issues and troubleshoot them. You can also download a report of the devices
and their configurations, properties, and settings and send it to Hewlett Packard Enterprise Support for
further troubleshooting.
Obtain MR Storage Administrator installation files through the Service Pack for ProLiant, or SPP, which you
can download from http://www.hpe.com/servers/spp/download. Be sure to use the latest SPP version for
the server.
174 Software and configuration utilities