Reinstalling From An Rpm Package (Linux Only) - HPE ProLiant User Manual

1. Download the ISO image file for the latest Intelligent Provisioning recovery media by clicking Download
website (https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_0e528dc701d14e04864ba71f27 https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_0e528dc701d14e04864ba71f27).
NOTE: NOTE:
The following servers and Intelligent Provisioning versions are supported:
Gen8 supports Intelligent Provisioning 1.x.
Gen9 supports Intelligent Provisioning 2.x.
Gen10 supports Intelligent Provisioning 3.x.
Gen10 Plus supports Intelligent Provisioning from 3.40.
Gen11 supports Intelligent Provisioning from 4.x
2. To download the ISO image file, complete the onscreen instructions.
3. Mount the ISO file in one of the following ways:
Using iLO virtual media.
NOTE: When using iLO virtual media, the installation time depends on the network condition. NOTE:
Burn the Intelligent Provisioning recovery media ISO file to a DVD and place it in the CD/DVD drive of the server.
Copy the recovery media to a USB key (See section Using the USB Key Utility for more information).
4. To power up the server Press ON.
5. To display the boot menu, press F11 during server POST.
6. Select CD/DVD to boot from the mounted ISO.
7. To update or reinstall Intelligent Provisioning, select the interactive method. The server continues booting from the Intelligent
Provisioning recovery media.
8. Select Reinstall Intelligent Provisioning when the window opens.
9. Reboot the server when the installation is complete by pressing F10.

Reinstalling from an RPM package (Linux only)

Reinstalling from an RPM package (Linux only)
Prerequisites Prerequisites
For SLES 15.x series, before the installation the user might needs to install gptfdisk , sdparm , and mdadm and the loading
usb_storage module to load.
For RHEL 8.x series, before the installation the user might needs to install sdparm and the loading usb_storage module to load.
Procedure Procedure
1. Download the RPM package file for the latest Intelligent Provisioning recovery RPM package from the SDR website ().
2. Execute the command:
rpm -i firmware-intelligentprovisioning-<version>.x86_64.rpm
3. Execute the command:
cd /usr/lib/x86_64-linux-gnu/firmware-intelligentprovisioning-ip-<version>/
4. Execute the command:
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers
Download from the Intelligent Provisioning
12