Table of Contents
Advertisement
6. Place the system on a flat, level surface.
Remove the access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power supplies, and internal
system components to cool before touching them.
Procedure
1. Power down the system (Power down the system).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3. Remove the system from the rack (Remove the system from the rack).
4. Place the system on a flat, level work surface.
5. Remove the access panel.
Removal and replacement procedures
39
Advertisement
Table of Contents
