Figure 4-4. Pneumatic Connections For Formal Calibration Of Units W/ Izs Valve Option - Teledyne T102 Operation Manual

Teledyne API - T102/501 TRS, Addendum to T101 Operation Manual

Figure 4-4. Pneumatic Connections for Formal Calibration of Units w/ IZS Valve Option

SAMPLE Gas
Figure 4-5. Pneumatic Connections for Informal Calibration Checks of Units with IZS
Gas flow must be maintained at all times for units with IZS Options installed. The IZS
option requires a permeation tube (customer supplied) which emits H
gas flow can build up H
Remove the permeation device when taking the analyzer out of operation.
07267B DCN6485
Source of
Ambient
Air
M501-TRS
To Analyzer
From Analyzer
S to levels that will damage the instrument.
2
VENT if input is pressurized
Sample
MODEL
Exhaust
Span
Zero Air (Scrubber)
To Converter
From Converter
Valve Option
NOTE
Pneumatic Connections
T102
S. Insufficient
2
29