11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
11.5.9 Trigger
This section explains the settings for specifying the trigger occurrence condition when the
logging type is selected as "Trigger logging".
There are the two types of trigger occurrence conditions below depending on the number
of conditions combined.
For details on processes of each trigger condition, refer to the following section.
Section 7.3.2 Trigger logging
(1) To select a single condition
11
- 101
11.5 Data Logging Setting
11.5.9 Trigger
• Single condition (if the number of conditions is 1)
• Compound condition (if multiple conditions are combined)
For the operations/settings after selecting a single condition, refer to the following
section.
Section 11.5.10 Trigger (single condition)