Mitsubishi Electric QJ81DL96 User Manual page 298

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
Item
Intervening system
Module type
Module setting
Head I/O
Access target system
Module type
Module setting
Network No.
Station No.
button
button
button
11
- 53 11.4 Common Setting
11.4.3 Access target CPU setting
Set the module type on the relay system when accessing the access target CPU.
Set the start I/O address (0 to FE0) of the module type on the relay system.
Set the module type on the communication destination system when accessing the access
target CPU.
Set the network number (1 to 239) of the module displayed by the module type on the
communication destination system.
Set the station number of the module displayed by the module type on the communication
*4
destination system.
Returns to the <<Network route>> tab.
Switches to the <<Multiple CPU specification>> tab.
Discards the settings and closes the screen.
*1: Module types which can be set are shown below according to the access source system module
type on the <<Network route>> tab.
• For "CC-Link IE Controller Network Module", "CC-Link IE Field Network Module",
"MELSECNET/H Module", "Ethernet Module"
Can be set when the access source system module type is other than "CC-Link IE Controller
Network Module", "CC-Link IE Field Network Module", "MELSECNET/H Module", or "Ethernet
Module".
• For "CC-Link Module", "Serial Communication Module"
Can be set when the access source system module type is other than "CC-Link Module" or
"Serial Communication Module".
*2: Set if the access source module type is "CC-Link Module" or "Serial Communication Module".
*3: Set if the access source module type is in the following cases.
• "CC-Link IE Controller Network Module"
• "CC-Link IE Field Network Module"
• "MELSECNET/H Module"
• "Ethernet Module"
*4: The setting range of each module type is shown below.
CC-Link IE Controller Network Module
CC-Link IE Field Network Module
MELSECNET/H Module
Ethernet Module
CC-Link Module
Serial Communication Module
Description
-
-
-
-
*3
Module type
Reference
-
*1
-
-
*2
-
-
-
-
-
-
-
(4) in this
section
-
Setting range
0 to 120
0 to 63
0 to 31