Mitsubishi Electric QJ81DL96 User Manual page 415

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
(1) Event names and subscripts in the continuous setting
(2) Total number and interval in the continuous setting
The following shows how the event name is set by the "Append subscripts to event
names" check box.
Example settings) Event name = Event
Continuous setting total number = 3
Continuous setting interval = 1
For the above example settings, the data names are set as shown below.
Item
A subscript is appended to event name
Event name
Configure when setting devices by leaving a fixed interval.
Example settings) Event name = Event
Continuous setting total number = 3
Continuous setting interval = 10
Start device = D100
For the above settings, devices are set as shown below.
Example 1 Example 2
Unchecked Checked
Event Event(1)
Event Event(2)
Event Event(3)
11.6 Event Logging Setting
11.6.9 Event batch insertion
9
10
11
12
13
14
15
16
11
- 170