File Saving Trigger Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

3.4

File Saving Trigger Setting

This section shows the screen for setting a device specified as a file saving trigger for saving a device and label when a
device of a CPU module rises or falls.
Note that this setting is not required if not specifying devices of a CPU module as triggers.
Window
Click "File Saving Trigger Setting" in the setting item tree.
Displayed items
Item
Device
*3
Establishment Condition
*3
Comment
*1 For devices that can be specified, refer to the following:
Page 29 Devices that can be specified as triggers
*2 Displayed in red if specifying a device that is not included in the range set in "Device Setting" in the CPU parameter.
*3 Can be edited when a device is specified for "Device."
Description
Specify a device used to determine whether a file saving trigger is satisfied.
Select a condition to satisfy a file saving trigger.
• : When the bit rises
• : When the bit falls
Set a comment to supplement a saving cause (up to 64 characters).
*1,*2
3 RECORDING SETTING
3.4 File Saving Trigger Setting
3
61