Mitsubishi Electric QJ81DL96 User Manual page 401

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
Item
button
button
Condition
Value change
Trigger value
Trigger value
Specify restoration values
Restoration value
button
button
(1) Value change
Imports global labels or device comments.
Disables relations with global labels.
Select the operator used to compare the trigger value with the monitoring data.
The event occurs when the value of the monitoring data changes.
(When value change is specified, the event is not restored.)
Specify the constant or string to compare with the monitoring data.
Specify the constant data (up to 16 characters) to compare with the monitoring data.
Check to specify the restoration value to suppress event occurrence.
Specify the restoration value (up to 16 characters).
Confirms the settings and closes the screen.
Discards the settings and closes the screen.
*1: Match to the data type with the one used for writing device values using a sequence program or
HMI.
*2: Related data cannot be edited.
The following shows the timing of the event occurrence when value change is
specified as the condition.
For a bit device:
The event occurs when it changes from ON to OFF and from OFF to ON.
ON
OFF
For a word device:
The event occurs with each change of the value.
60
40
20
0
Description
-
Event occurs when value changes
Event occurs when value changes
11.6 Event Logging Setting
11.6.7 Event setting (single condition)
9
(From the previous page)
Reference
Section
11.2.10 (1)
Section
11.2.10 (4)
10
Section
11.2.10 (2)
-
-
(1) in this
section
-
11
-
(2) in this
section
-
-
12
13
14
15
16
11
- 156