Mitsubishi Electric QJ81DL96 User Manual page 135

3
SPECIFICATIONS
Column name
The monitoring data value at occurrence/restoration is output in the following format.
• For a single condition
'(start device name)=(monitoring data value)'
• For a compound condition (comparison)
'(start device name)=(monitoring data value)'
• For a compound condition (number of times)
'Number of times=(count value); (start device name)=(monitoring data value)'
• For a compound condition (order)
'(completion information); (start device name)=(monitoring data value)'
Monitoring data value
The following is output in the completion information.
*5*6
column
• When normal pattern is detected: 'Complete'
• When abnormal pattern is detected or timeout is detected: 'Phase=[condition location]'
The condition number which detected the abnormal pattern or timeout is output to condition
location.
1: 1st condition
2: 2nd condition
3: 3rd condition
Not output when the event type is "At startup of module".
(Outputs CR+LF immediately after the comma.)
*1: In the underlined portions, information of set amount of event condition is output delimited with a ';
(semicolon)'.
*2: In the underlined portions, information of start condition, end condition and count condition is output
delimited with a '; (semicolon)'.
*3: If the monitoring data value is string type data, characters outside the ASCII range, double quotes
("), commas (,), and semicolons (;) are substituted with periods (.).
The size of the data line is calculated as shown below.
Example) For date column format of YYYY/MM/DD hh:mm:ss.s, event name length 10,
occurrence comment length 4, single condition, monitoring data is word [unsigned]
decimal format 0 digits
Data size = 21 [date column] + 2 [event number column] + 10 [event name column] +
1 [occurrence type column] + 4 [occurrence comment column] +
13 [monitoring data value column
5 [number of commas] + 2 [CR+LF]
= 58 [bytes]
*4: When 'D12000=-23456' is set for the monitoring data value column, 13 bytes.
*5: When CSV files are opened with Excel, the date column format is displayed in Excel's default
setting. Set the cell format as necessary.
Example) To display year, month, date, hour, minute, second, millisecond information
Specify the user defined display format below.
m/d/yyyy hh:mm:ss.000
*6: Not output when the data count is 0.
Output content
*3
*1,*3
*4
] +
3.6 CSV File Format
3.6.3 Event logging file
(From the previous page)
Size
(in bytes)
*2,*3
*2,*3
0 to 16664
3
- 65
1
2
3
4
5
6
7
8