Mitsubishi Electric QJ81DL96 User Manual page 466

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
Item
Data conditions
*1
Comparison
Data name
Conditions
Data/Constant
Data name/
Constant value
At the time of change of
value
Data name
11
- 221 11.7 Report Setting
11.7.6 Creation trigger
(a) Trigger condition setting screen
Setting screen
Compares data, and the trigger occurs when the condition is established.
Select the target data.
To add a new data setting, select "(Add)" from the list box and click
Select a comparison operator. (
Select the type of data to compare to the target data. ("Data" or "Constant")
Set the data or constant data (up to 16 characters) to compare to the target data.
To add a new data setting and compare to the target data, select "(Add)" from the list box
and click .
The trigger occurs when the value changes.
Select the data to monitor for the value change.
To add a new data setting, select "(Add)" from the list box and click
Description
-
)
Reference
Section 11.2.9
Section 11.5.6
.
Section 11.5.10
(1) (a)
.
(Continued on the next page)
-
-
-
-
-