12
FUNCTIONS OF CONFIGURATION TOOL (WRITING/READING/VERIFYING DATA)
12.3 Writing Data
This function writes the settings to the CompactFlash card inserted in the high speed data
logger module set with transfer setup ( Section 12.1).
12
- 3
12.3 Writing Data
Operating procedure
Select [Online] [Write] (
Click the
< Confirmation of the write execution >.
Click the
< Confirmation of the setting reflection to the module operation >.
Screen display
< Confirmation of the write execution >
< Confirmation of the setting reflection to the module operation >
POINT
(1) While the write (update settings) processing is being performed, all functions
including the data logging function, event logging function, and report setting
function stop.
(2) Network settings cannot be reflected by only performing the data write.
Update the settings by performing one of the following operations.
• Reset the programmable controller CPU
• Restore the power of the programmable controller CPU
).
button on the dialog box shown in the figure of
button on the dialog box shown in the figure of