Mitsubishi Electric QJ81DL96 User Manual page 452

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
11
- 207 11.7 Report Setting
11.7.5 Layout setting
Storing file: Outputs the data that are being stored.
A report can be output from the data logging file which is being stored. The
processing can be tracked by creating reports such as a daily report or per-
process report from the data being stored.
Example) Output the latest logging data which is being stored when the data
logging file is switched at the timing of the end of a batch or lot.
Report layout
1
Both: Outputs the both data.
A report is created from the data of both the storing file and the latest saved file.
Specifying the number of records, the latest logging data up to the timing of
occurrence of the creation trigger can be output to a report.
In this case, specify the number of records of the file switching so that it is always
greater than the number of records to be output to a report.
Report layout
Storing file
Sample.BIN
File output
Storing file
Sample.BIN
File output
Saved files
Latest saved file
00000002.BIN 00000001.BIN
Saved files
Latest saved file
00000002.BIN 00000001.BIN