Mitsubishi Electric QJ81DL96 User Manual page 225

9
REPORT FUNCTION
POINT
(1) In order to perform high speed data sampling, a programmable controller
CPU which supports the high speed data sampling function is required.
 Section 2.2 Applicable Systems
(2) The data logging, event logging, and report functions of the high speed data
logger module are best effort functions.
Since module processing time changes according to the settings and status
of other devices, it may not operate with the set data sampling interval. Run
the system by fully verifying the processing time of each function when
constructing it.
For processing time, refer to the following chapter.
 Chapter 17 PROCESSING TIME
(3) The total number of settings is 32 for each of the functions below when 'data
sampling method' is specified as 'high speed data sampling'.
• Data logging function
• Event logging function
• Report function
9.2 Creation Trigger and Current Value Data Sampling
9
10
11
12
13
14
15
16
9
- 7