Appendix 8.2 Processing Time Of Ftp Transfer Function And E-Mail Function - Mitsubishi Electric QJ81DL96 User Manual

APPENDIX

Appendix 8.2 Processing time of FTP transfer function and e-mail function

Since the processing time of FTP transfer function and e-mail function changes depending
on the settings, file size, and the status of network and server, the operation may not
operate with the set timing.
Fully examine the processing time for each function at system construction before
operating the system.
Additionally, the following conditions may affect the FTP transfer function and e-mail
function: when the CPU which does not exist in the access target CPU is set using high
speed data logger function version (first 5 digits of serial number) as shown below, or the
high speed data logger cannot communicate with the access target CPU temporary
because of the power interruption of access target CPU or network failure.
(1) Serial number whose first five digits are "15111"
When the following conditional expression is satisfied, 071BH (FTP transfer queue full
error), 0713H, or 0716H (mail send queue full error) occurs, and FTP transfer and e-
mail send may fail.
[Condition expression]
Number of FTP transfer or e-mail send per minite
RTn: Response monitoring time of nth access target CPU which cannot perform
communication
( Section 4.5 (3) Response monitoring time setting (Switch 3 (lower byte)))
Use high speed data logger modules with the status that can communicate with the
CPU set as access target CPU.
(2) Serial number whose first five digits are "15112"
There is no affection for the FTP transfer function and e-mail function.
Appendix 8.2 Processing time of FTP transfer function and e-mail function
384
>
( RT1 +RT2 +
Appendix 8 Process Modifications
17
18
A
I
+ RTn )
App
- 20