Table of Contents
Advertisement
11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
(1) FTP setting screen
Setting screen
Item
FTP server name
Set the FTP server name of the file transfer destination as an IP address or domain name (up to 64 characters).
Login user name
Set the login user name to the FTP server (up to 32 characters).
Login password
Set the login password for the FTP server (up to 16 characters).
Confirm login password
Set the login password again for verification (up to 16 characters).
Directory path
Set the file directory path of the file transfer destination (up to 64 characters).
Data transfer mode
Set the FTP data transfer mode as "PORT mode (normal)" or "PASV mode"
Reflects the settings and closes the screen.
button
Discards the settings and closes the screen.
button
*1: When the SMTP server name is set with a domain name, the DNS server needs to be set in "DNS
server setting" on the Network settings screen ( Section 11.4.1).
*2: Use '/' or '\' as the delimiter between directories.
*3: Normally specify "PORT mode". Specify "PASV mode" when communications with the FTP server
are only allowed in "PASV mode" by Windows firewall or other firewalls.
POINT
Access port 21 of the FTP server.
You can change the port number based on the intelligent function module switch
setting and buffer memory.
Section 4.5 Intelligent Function Module Switch Setting
Section 3.4.17 (1) FTP transfer port number (address: 7999)
Description
*2
*3
.
11.4 Common Setting
11.4.4 FTP setting
9
10
11
12
*1
13
14
15
16
11
- 60
Advertisement
Table of Contents
Troubleshooting
