2
SYSTEM CONFIGURATION
2.6 System Configuration Precautions
This section describes the system configuration precautions.
2.6.1 Precautions when using Redundant CPUs
The following describes precautions when using Redundant CPUs.
(1) Mountable base unit
(2) "Access target CPU setting"
2.6.2 Precautions when using C Controller modules
The following describes precautions when using C Controller modules.
(1) "Access target CPU setting"
(2) Network communication route
2
- 16
2.6 System Configuration Precautions
2.6.1 Precautions when using Redundant CPUs
When using the high speed data logger module in a redundant system, be sure to
mount the module to the extension base unit for CPU/redundant power supply.
The high speed data logger module cannot be mounted to the main base unit in a
redundant system.
• When the high speed data logger module is mounted to the Redundant CPU, it
can only access the own station CPU.
It cannot access CPUs of other stations.
• The high speed data logger module cannot access Redundant CPUs of other
stations.
• When the high speed data logger module is mounted to the C Controller module,
it can only access the own station CPU.
It cannot access CPUs of other stations.
• When the control CPU of the access target network module is a C Controller
module, only the control CPU of the network module can be accessed.
• When the network module is mounted to the C Controller module, the network
module cannot be used as a relay station.